It is used to determine the compression strengh, shearing strengh, bending strengh and tensile strengh of the moulding sand.
It is also used to determine the strengh of ceramics, cement and so on.
|Max testing force
Max testing force 3000-10000N
compression strengh 0-1.5MPa, 0-3MPa
tensile strengh 0-6MPa, 0-12MPa
shearing strengh 0-1.2MPa, 0-2.4MPa
bending strengh 0-60MPa, 0-120MPa
display accuracy ±1.5%FS
rated power 500W
power source AC220V/50Hz
1. It adopts special stepping motor, turbineworm reducer, linear sliding shaft balance system
2. It is controlled by micro computer.
3. It can load and unload automatically and uniformly.
4. It has these functions, such as saving data, power failure protection, printing...
It is widely used in foundry, machinery, casting, qualitative inspection, scientific research, university lab....