1. Its main use is to test the tensile strengh, shearing strengh, bending strengh and compression strengh of the moulding sand at room temperature
2. Other uses are to determine the strengh of ceramics, cement and so on.
|Max testing force
- Max testing force 3000N
- compression strengh 0-1.5MPa
- tensile strengh 0-6MPa
- shearing strengh 0-1.2MPa
- bending strengh 0-60MPa
- display accuracy ±1.5%FS
- rated power 500W
- power source AC220V/50Hz
1. It uses special stepping motor, turbineworm reducer, linear sliding shaft balance system
2. Micro computer controls the process.
3. It can load and unload automatically and uniformly.
4. It has these functions, such as saving data, power failure protection, printing...
It is widely used in foundry, machinery, casting, qualitative inspection, scientific research, Research unit,university lab....